Breaking In - BMW S 1000XR Rider's Manual

DTC self-diagnosis
completed
The DTC symbol is no longer
displayed.
Watch all warning and indicator
lights on the display.
DTC self-diagnosis not
completed
The DTC function is not
available, as the self-diagnosis
function has not been
completed. (To check wheel
speed sensors, motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
If an DTC error is displayed after
the DTC self-diagnosis is com-
pleted:
It remains possible to con-
tinue riding. It must be noted
that the availability of the DTC
function is restricted or it is not
available at all.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Dealer.

Breaking in

Engine
In the period preceding the
running-in check (initial inspec-
tion), attempt to change rpm
and engine load as frequently
as possible, avoiding extended
periods at constant rpm.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.
Engine run-in speed
-1
<7000 min (Odometer read-
ing 0...186 miles (0...300 km))
Engine run-in speed
<9000 min -1 (Odometer
reading 186...621 miles
(300...1000 km))
no full throttle (Odometer
reading 0...621 miles
(0...1000 km))
Observe mileage, after which
the running-in check should be
performed.
NOTICE
The speed is limited by the
engine management system up
to the running-in check. This
speed monitoring function is
switched off during the running-
in check by your authorized
BMW Motorrad retailer.
6
97
z