BMW S 1000XR Rider's Manual page 145

Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Remove cover 1 to replace
light source for low-beam
headlight.
Remove the cover 2 to replace
the light source for the high-
beam headlight.
Disconnect plug 3.
Release wire spring 4 from
catch on left and right and fold
up.
Remove light source 5 from
the socket.
Replace defective light source.
NOTICE
Light sources featuring spec-
ification ratings for higher lev-
els of illumination are commer-
cially available as special acces-
sories. These light sources have
a shorter service life than con-
ventional light sources and also
generate more heat. Under some
8
143
z