Configurator - Toshiba 2000 User Manual

Chapter 2 Configuration

2.6 Configurator

2
The PROFIBUS-DP configurator is used to monitor the PROFIBUS status, read/write cyclic
data, and set parameters from a PC.
Use the following configurator for PF611.
•
12
Name : Sycon
Manufacturer : HMS (Sweden)
Supported OS : Windows 95/98/NT/2000
Connecting to PF611
The PC and PF611 are connected through RS232C. Use the following cable to connect
the RS232C connector of the PC with the CONFIG connector (9 pin male) of the PF611.
Cable : Cross cable with 9-pin male connectors at both ends
(Cross-cable for IBM-AT compatible PC)
PC
Figure 2-8 Configurator connection
9-pin D -SUB
Cable
model 2000 PROFIBUS Module User's Manual for S2T/S2E
Transmission station