2.6 Configurator
The PROFIBUS-DP configurator is used to monitor the PROFIBUS status, read/write
cyclic data, and set parameters from a PC.
Use the following configurator for PF311.
Name
Manufacturer
Supported OS : Windows 95/98/NT/2000
• Connecting to PF311
The PC and PF311 are connected through RS232C. Use the following cable to
connect the RS232C connector of the PC with the CONFIG connector (9 pin male) of
the PF311.
Cable
PC
6F8C0921
: Sycon
: HMS (Sweden)
: Cross cable with 9-pin male connectors at both ends
(Cross-cable for IBM-AT compatible PC)
9 - pin D - SUB
Cable
Figure 2-7 Configurator connection
2.6 Configurator
Transmission station
2
11