Table of Contents
Advertisement
Type: 126" width of cut, seven blade, front mounted
rotary. 54" width of cut, three blade center section. Two
36" width of cut wings; 90" width of cut with one wing up.
Rear discharge with even dispersion over the entire
width of cut.
Mowing Rate: Mows up to 8 acres/hr. at 6.5 mph.
Trimability: Trims on both sides.
Height–of–Cut: Adjustable from 1" to 5" in 1/2"
increments.
Construction: Housings are 12 gauge high strength
steel, 5.5" deep, welded construction and reinforced
with 10 gauge channel. Covers are impact resistant,
molded plastic.
Blades: Seven 19" long, 1/4" thick, and 2–1/2" wide,
heat treated steel blades.
Belt Idlers: Self–tensioning permanently lubricated
idlers.
Description
Decks straps
Wear plate
Capscrew
Locknut
Operator's Manual
Parts Catalog
Registration card
SPECIFICATIONS
Wing Decks: Wings can be hydraulically raised from
the operator's seat for transport or cutting with either
wing and center deck or center deck only. Wings cut
from level to 15 up and down. Further lift disengages
the blade and applies a blade brake.
Suspension / Caster Wheels: Four front and two rear
pneumatic castor tires with ball bearings. Center deck
tires: 10.25" x 3.25". Wing deck tires: 8" x 3.25".
Anti–scalp cup located on each blade. Three anti–scalp
rollers
counterbalanced.
OPTIONAL EQUIPMENT
Gear Box Pulley (Tip Speed 14,500), Part No. 86–3100
Mulcher Kit, Model No. 30475
Specifications and design subject to change
without notice.
LOOSE PARTS CHART
Qty.
2
2
4
4
1
1
1
6
on
center
deck.
Use
Mount deck straps to deck
Read before operating machine
Fill out and return to Toro
Deck
is
hydraulically
Advertisement
Table of Contents
