SAFETY AND INSTRUCTION DECALS
The following safety and instruction decals are affixed to the cutting unit. If any decal becomes illegible or damaged,
install a new decal. Part numbers are listed below and in your Parts Catalog.
UNDER DECK COVERS (3)
(Part No. 85–6410)
Replace Cover Before Operating
ON LEFT CASTOR ARM
(Part No. 86–0780)
Height–of–Cut Adjusting Procedure
ON WING DECKS (2)
(Part No. 66–1340)
Keep Hands & Feet Away From
Rotating Blades
ON RIGHT WING DECK
(Part No. 86–0700)
Height–of–Cut Adjusting Procedure
ON LEFT CASTOR ARM
(Part No. 86–0720)
Height–of–cut Adjusting Procedure
ON CUTTING DECKS (5)
(Part No. 55–4300)
Spring Loaded
ON EACH CUTTING UNIT
(Part No. 86–0740) Center Deck
(Part No 86–0760) R.H. Wing Deck
(Part No. 86–0750) L.H. Wing Deck
Belt Routing
ON CUTTING DECK (5)
(Part No. 43–8480)
Keep Hands & Feet Away
5
ON RIGHT CASTOR ARM
(Part No. 86–0730)
Height–of–Cut Adjusting Procedure
ON CENTER CUTTING DECK
(Part No. 68–8340)
Blade Bolt Torque
ON BELT TENSION ADJUSTERS
(Part No. 106–1005)
Belt Adjusting Procedure
ON LEFT WING DECK
(Part No. 86–0710)
Height–of–Cut Adjusting Procedure