Chapter 6: Summit Option Cards; Overview - Extreme Networks Summit X150 Series Installation Manual

6 Summit Option Cards
This chapter describes Summit option cards available for use with Summit X350 series, X450 series,
X450a series, and X450e series switches. The chapter includes the following sections
Overview on page 143
●
Safety Information on page 144
●
Summit XGM-2xn Option Card on page 144
●
Summit XGM2-2xn Option Card on page 145
●
Summit XGM2-2xf Option Card on page 146
●
Summit XGM2-2sf Option Card on page 147
●
Summit XGM2-2bt Option Card on page 147
●
Installing a Summit Port Option Card on page 148
●
NOTE
Read the information in this chapter thoroughly before attempting to install or remove a Summit option card.

Overview

Five types of Summit port option card are available for the Summit X350, X450, X450a, and X450e series
switches:
Summit XGM-2xn option card: Adds one or two 10-gigabit XENPAK optical transceivers to a
●
Summit X450 series switch.
Summit XGM2-2xn option card: Adds one or two 10-gigabit XENPAK optical transceivers to a
●
Summit X450a series or X450e series switch.
Summit XGM2-2xf option card: Adds one or two 10-gigabit XFP modules to a Summit X350 series,
●
X450a series or X450e series switch.
XGM2-2sf option card: Adds one or two 10-Gigabit SFP+ modules to a Summit X350 series, X450a
●
series, or X450e series switch.
XGM2-2bt option card: adds one or two fixed 10GBASE-T ports to a Summit X350 series, X450a
●
series, or X450e series switch.
These option cards are installed in an option slot on the rear panel of compatible switches. The option
slot is covered by a blank panel if the option card is not installed.
ExtremeXOS Summit Family Switches Hardware Installation Guide
143