Summit X450A-24Tdc Switch - Extreme Networks Summit X150 Series Installation Manual

Summit Family Switches
Figure 32: Summit X450a-24t Switch Rear Panel
10 Gigabit
uplink option

Summit X450a-24tDC Switch

The front panel of the Summit X450a-24tDC switch
Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 1-20) that provide 20 Gbps of
●
high-density copper connectivity
Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration.
●
Serial console port used to connect a terminal and perform local management.
●
Figure 33: Summit X450a-24tDC Switch Front Panel
The rear panel of the Summit X450a-24tDC switch
Slot for one of the following Summit option cards:
●
Summit XGM2-2xn option card, which allows you to add up to two 10-Gigabit XENPAK modules
■
Summit XGM2-2xf option card, which allows you to add up to two 10-Gigabit XFP modules
■
For information about these Summit option cards, see
page 145 or
46
Management port
10 Gigabit
stacking ports
57.
1 2
Solid ON=Link
Blinking=Activity
10G
MGMT 1
STACK NO.
FAN 2
Stack
PSU-1 1
PSU-E 2
Stack number
indicator
"Summit XGM2-2xf Option Card" on page
External power
supply connection
Power socket
(Figure 33) includes:
"Summit X450, X450a, and X450e Series
10/100/1000 Mbps ports
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Combination ports
(Figure 34) includes:
"Summit XGM2-2xn Option Card" on
146.
ExtremeXOS Summit Family Switches Hardware Installation Guide
SH_028
Console
port
23 24 21X 22X 23X 24X
Shared Ports
SH_020B