Connecting Network Interface Cables - Extreme Networks Summit X150 Series Installation Manual

Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Installing Summit Family Switches
Figure 91: Removing the Switch from a Cabinet
6 Set the switch on a secure work surface. Using a #1 Phillips screwdriver, remove the front mounting
brackets from the sides of the switch.
7 Remove the rear mounting brackets from the rear rack posts.

Connecting Network Interface Cables

Use the appropriate type of cable to connect the ports of your switch to another switch or router. For
connections to the 10GBASE-T ports on the Summit X650-24t switch, see
distances.
Table 20: Cable Distances for 10GBASE-T Ports
Cable Type
CAT5E
CAT6
CAT6A
NOTE
Cables used for connection to the 10GBASE-T ports on the Summit X650-24t switch must meet the minimum
requirements of the IEEE 802.3an standard.
118
Maximum Distance
55 meters
55 meters
100 meters
SH_104
Table 20
ExtremeXOS Summit Family Switches Hardware Installation Guide
for cable types and

Advertisement

Table of Contents
loading

Table of Contents