Side Keystone; Blanking - Barco R9001140 Owner's Manual

Side keystone

Highlight Side Keystone by pushing the control stick forward or
backward and press ENTER to select.
The side keystone adjustment is used to align the image if the
projector is mounted as a non standard projection angle.
Push the control stick to the right or to the left to adjust the keystone
of the image.
When the upper part of the image is wider than the lower part of the
image, push the control stick to the left. The number indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the
image, push the control stick to the right. The number indication
below the bar scale will be positive.

Blanking

Highlight Blanking by pushing the control stick forward or backward
and press ENTER to select.
Blanking adjustments affect only the edges of the projected image
and are used to frame the projected image on to the screen and to
hide or black out unwanted information (or noise). A '0' on the bar
scale indicates no blanking.
The following blanking corrections are possible :
- top blanking
- bottom blanking
- left blanking
- right blanking
5975207 BARCOGRAPHICS 9100 081196
Random Access Adjustment Mode
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with
then <ENTER>
<EXIT> to return.
Top blanking
Left blanking
Bottom blanking
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
or
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return.
Right blanking
9 - 9