Random Access Adjustment Mode; Starting Up The Random Access Adjustment Mode; File Service - Barco R9001140 Owner's Manual

9

RANDOM ACCESS ADJUSTMENT MODE

Starting up the Random Access Adjustment Mode

Push the control stick forward or backward to highlight 'Random Access' and then press
ENTER .
RANDOM ACCESS
ADJUSTMENT MODE

File service

Before using a new source, a correct file has to be installed. The
projector's memory contains a list of files corresponding to the most
used sources. When the new source corresponds with one of these
files, the file can be loaded and saved for future use. When there is
a little difference, the file can also be loaded and than edited until the
source specs are reached.
5975207 BARCOGRAPHICS 9100 081196
FILE SERVICE
PICTURE TUNING
GEOMETRY
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
SYNC
STILL VIDEO
COLOR BALANCE
GAMMA
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
OPTIONS
File annotation :
xxxxxxxx.xxx x xxxxXxxxxi
xxx : file extension, first character is C (for custom made
files) or S (for standard files).
The second and third character is used for a following
number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
Random Access Adjustment Mode
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
Select with
then <ENTER>
<EXIT> to return.
i or blanc : i = interlaced, blanc = not
interlaced
xxxxXxxxx : active pixel rating
x : source number
GUIDED
SERVICE
Source 01
or
9 - 1