Table of Contents
Advertisement
Location and Functions of Control
b. Remote control
This remote control includes a battery powered infrared (IR) transmit-
ter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation
and set up. It includes automatic storing of :
- picture controls (Brightness, Sharpness...)
- settings
Other functions of the remote control are :
- switching between standby and operational mode.
- switching to "pause" (blanked picture, full power for immediate
restarting)
- direct access to all connected sources.
- variable adjustment speed : when pushing continuously on the
control stick or the picture keys, the adjustment will be executed
in an accelerated fashion.
Local keypad
Terminology
Back light key : when activated, all keys will be lighted up
1
and visible in the dark.
ADJ. : ADJUST key, to enter the adjustment mode or for
2
quick exit in the adjustment mode.
Address key (sunk key), to enter the address of the projector
3
(between 0 and 9). Press the sunk address key with a pencil,
followed by pressing one digit button between 0 and 9.
STBY : stand by button - to start projection when the
4
power switch is switched on.
- to switch off the projector
without switching off the power switch.
PAUSE : to stop projection for a short time, press 'PAUSE'.
5
The image disappears but full power is retained for immedi-
ate restarting.
Help : on line help information
6
Digit buttons : direct input selection.
7
Picture controls : use these buttons to obtain the desired
8
picture analog level (see also 'Controlling').
PHASE : used to remove the instability of the image.
9
TEXT : when adjusting one of the image, e.g. controls during
10
a meeting, the displayed bar scale can be removed by
4-2
0
9
STANDBY
7
8
ENTER
6
5
TEXT
3
4
SHARPN
TINT
2
1
PHASE
COLOR
Remote Control (RCU)
15
4
14
13
EXIT
12
5
PAUSE
10
BRIGHTN
8
CONTRAST
9
7
pressing 'TEXT' key first. To re-display the bar scale on the
screen, press 'TEXT' key again. 'TEXT' key only active in
operational mode.
FREEZ : press to freeze the projected image.
11
ENTER : to start up the adjustment mode or to confirm an
12
adjustment or selection in the adjustment mode.
EXIT : to leave the adjustment mode or to scroll upwards
13
when in the adjustment mode.
Control stick key (on RCU) or '+' and '-' keys (cursor keys):
14
to make menu selections when in the adjustment mode.
The control stick can move forward, backward, to the right or
to the left.
Comparision between control stick movement and the use of
the cursor keys on the local keypad :
RCU
control stick forward
control stick backward =
control stick to the right =
control stick to the left =
Use the '+' and '-' keys (cursor keys) : to increase or
decrease the analog level of the image controls when they
are first selected.
RC operating indication : lights up when a button on the
15
remote control is pressed. (This is a visual indicator to check
the operation of the remote control)
5975207 BARCOGRAPHICS 9100 081196
1
2
ADJ
EXIT
3
ENTER
4
STBY
PAUSE
TEXT
FREEZ
5
HELP
+
-
?
PHASE
6
0
+
9
-
SHARPNESS
7
-
+
7
8
TINT
5
6
+
-
COLOR
3
4
-
+
BRIGHTNESS
1
2
+
-
CONTRAST
32a
=
local keypad
=
'+' key up
'-' key down
'+' key right
'-' key left
15
14
13
12
11
10
9
8
Advertisement
Table of Contents
