Toshiba BU302MG Manual page 8

2.8 Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger
signal. Trigger control from PC is available as well.
2.9 Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output
area. And reduces occupied data rate of USB bus by reducing horizontal output area.
2.10 Binning
B/W models have binning. In this mode, pixel data is combined by vertical and horizontal. Vertical
binning achieves high frame rate.
2.11 Decimation
Camera reads all effective areas at high speed by skipping lines.
2.12 Color processing
Color models have built in color processing. There are RGB, BGR, YUV 4:2:2, YUV 4:1:1, Bayer
and Mono output modes. In addition, it produced an image with restrained false color by adaptive
filter interpolating 7 x 7 pixels.
2.13 IR –cut filter
Build-in IR-cut filter models are optional for color models.
Suffix [F] is attached to the model name of built-in IR-cut filter model. (e.g. BU302MCF)
* Suffix [F] is not shown in the common part of specifications.
2.14 Compact and lightweight
This camera is compact and lightweight; it is easy to integrate into industrial equipment.
2.15 EU RoHS & Chinese ROHS
* USB is a unified standard established by USB-IF (USB Implementers Forum).
* USB3 Vision is a unified standard established by AIA (Automated Imaging Association).
* GenICam is a registered trademark of EMVA (European Machine Vision Association).
* IIDC2 is a unified standard established by JIIA (Japan Industrial Association).
* e-CON (Easy & Economy connector) is a sensor connector that is normalized by the
manufacturer of the sensor, FA equipment and connector.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
6
http://www.toshiba-teli.co.jp/en/index.htm
D4253375C