Download  Print this page

Sensor Output - Toshiba BU302MG Manual

Cmos camera
Hide thumbs

Advertisement

5.17 GPIO
Selected signals are output from GPIO pins of I/O connector. Following signals are selectable.
Output signal is 5V CMOS.
TIMER0 ACTIVE
USER OUTPUT
EXPOSURE ACTIVE
FRAME ACTIVE
FRAME TRANSFER
FRAME TRIGGER WAIT
EXT_TRIG
Exposure

Sensor Output

USB Streaming
TIMER0 ACTIVE
EXPOSURE
ACTIVE
FRAME ACTIVE
FRAME
TRANSFER
FRAME TRIGGER
WAIT
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
: This signal can be used as strobe control signal.
The delay time and pulse width of this signal are configurable.
: Level selectable user output by register setting.
: Period from exposure start to end.
: Period from exposure start to the CMOS transfer completion.
: Period of transferring image data on USB bus.
: Indicating waiting a Random Trigger Shutter.
An External trigger is input during this period,
exposure starts immediately.
VD
Delay Duration
14
* ActiveLow
http://www.toshiba-teli.co.jp/en/index.htm
D4253375C

Advertisement

loading

  Also See for Toshiba BU302MG

  Related Manuals for Toshiba BU302MG

This manual is also suitable for:

Bu302mBu302mcgBu302mcf