Toshiba BU302MG Manual page 18

5.19 Binning
B/W models have 2 x 2 binning. In the binning, pixel data is combined by vertical and horizontal.
When you set up a value of the one side for horizontal or vertical binning, the other side of the value
is set up automatically.
*Binning and Scalable cannot operate at the same time.
5.20 Decimation
Cameras have 2 x 2 decimation, cameras read all effective areas at high speed by skipping lines.
When you set up a value of the one side for horizontal or vertical decimation, the other side of the
value is set up automatically.
*Decimation and Scalable cannot operate at the same time.
5.21 Reverse
Image can be flipped in horizontal and/or vertical direction.
5.22 Defect Pixel Correction
Defect Pixel Correction is available up to 256 pixels.
5.23 Image Buffer
Camera stores images temporarily in image buffer, and read them out in arbitrary timing.
5.24 User Free Memory
A free memory area is available to read and write arbitrary data for user. Individual numbers can be
assigned when multiple BU cameras are connected.
5.25 Test Pattern
Following test patterns are available.
Black
White
Grey A
Grey B
Horizontal ramp waveform
Vertical ramp waveform
Grey scale (B/W models only)
Color Bar (Color models only)
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
: Full screen 0 LSB (@ 8-bit)
: All pixels 255 LSB (@ 8-bit)
: Full screen 170 LSB (10101010
: Full screen 85 LSB (01010101
16
) (@ 8-bit)
B
) (@ 8-bit)
B
http://www.toshiba-teli.co.jp/en/index.htm
D4253375C