Toshiba BU302MG Manual page 20

Model Name
With optical glass
With IR-cut filter
Imager
Number of effective pixels
Scanning area (H) x (V) [mm]
(V) [μm]
Pixel size x
(H)
Scan method
Electronic shutter method
Aspect ratio
Sensitivity
With optical glass
With IR-cut filter
Minimum illuminance
With optical glass
With IR-cut filter
Gain
Setting range
Black Level
Gamma
Hue
Saturation
White balance
Effective range
MWB setting format
OPWB effective area
LUT
Image Buffer
User Setting Memory
User Free Memory
Test Pattern
Power supply
Power consumption(*1)
(*1) at the all pixel readout
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
BU302MCG
BU302MCF
(H) x (V) 2064 x 1544
7.12 x 5.33 (1/1.8 type)
2400lx, F4, 1/120s
2650lx, F4, 1/120s
-25 to 25% (factory setting : 0% [ 0LSB@8bit ])
Horizontal ramp waveform, Vertical ramp waveform, Color bars
CMOS image sensor
3.45 x 3.45
Progressive
Global shutter
4:3
F1.4, Gain +24dB, Video level 50%
10lx
11lx
MANUAL
0 to +24dB (factory setting : 0dB)
γ=1.0 to 0.45 (factory setting : γ=1.0)
-180° to 180° (factory setting : 0°)
x0 to x2 (factory setting : x1.3)
MWB, OPWB (factory setting : MWB)
With optical glass : N/A
With IR-cut filter : 2,500 to 6,500K
R/B gain independent setting
Full pixel
Input 12 bit, Output 12 bit
64M Byte
15 channels
64 Byte
Black, White, Grey A, Grey B
(factory setting : OFF)
DC +5V5% (from USB connector)
4.0W (maximum)
18
http://www.toshiba-teli.co.jp/en/index.htm
BU505MCG
BU505MCF
2464 x 2056
8.50 x 7.09 (2/3 type)
6:5
3000lx, F5.6, 1/75s
3300lx, F5.6, 1/75s
6lx
7lx
D4253375C