Table of Contents
Advertisement
Installation
Note: Determine the left and right side of the machine from the normal operating position.
Note: To use the snowthrower with your tractor, you must have a rear-mount Attach-A-Matic
and chains, all of which must be purchased separately. If you will be using the snowthrower on slopes or in very slippery
conditions, purchase a rear weight box instead of the rear wheel weights.
Loose Parts
DESCRIPTION
Snowthrower frame assembly
Lift tube
Clevis pin, 1/2 x 2-5/8 in. (67 mm)
Clevis clip
Discharge chute assembly
Washer, 5/16 in. (8 mm)
Locknut, 5/16 in.
Carriage bolt, 5/16-18 x 3/4 in. (19 mm)
Clevis pin, 3/8 x 1 in. (25 mm)
Hairpin cotter, small
Pulley box
Belt
Clevis pin, 1/2 x 1 in. (25 mm)
Clevis clip
Spring tension link
Support rod link
Support brace
Washer, 13/16 in. (21 mm)
Hairpin cotter, large
Washer, 15/16 in. (24 mm)
Crank support
Locking pin
Chute control rod
Hairpin cotter, small
Hairpin cotter, medium
Pulley cover
Screw, #10 x 1/2 in. (13 mm)
Rod Assembly
Spacer washer, 1 in. (25 mm)
C-pin
QTY.
1
1
Attaching the lift tube
1
1
1
3
Assembling the discharge chute
3
3
2
Preparing the tractor attachment lift
2
1
Installing the pulley box
1
1
1
1
1
2
2
4
2
1
Mounting the snowthrower to the tractor
1
1
3
1
1
4
1
5
2
5
hitch, rear wheel weights
USE
Hide quick links:
Advertisement
Table of Contents
