Toro 79366 Operator's Manual page 9

3
Figure 12
1. Pulley box
2. C-pin
Connecting the Snowthrower to the Mid
Attach-A-Matic Hitch
1. Pull the tractor toward the snowthrower until the
snowthrower frame connecting pins are directly below
the mid Attach-A-Matic hitch (Fig. 13)
2
1
3
Figure 13
Right side of tractor shown
1. Mid Attach-A-Matic hitch
2. Snowthrower connecting
pins (right side shown)
2. Ensure that the mid Attach-A-Matc hitch latches are
open.
3. Slide the round end of the crank support under the
notch in the snowthrower frame (Fig. 14).
2
1
4
m–4345
3. Attach-A-Matic latch
4. Hairpin cotter, small
m–4401
3. Snowthrower frame
1
Figure 14
Right side of tractor shown
1. Crank Support
4. Use the crank support as a lever to lift the
snowthrower frame until its connecting pins are
completely inside the notches in the mid
Attach-A-Matic hitch (Fig. 15).
Warning
The snowthrower is heavy and can injure hands
or feet if it falls on them.
Keep your hands and feet away from the
underside of the snowthrower frame.
5. Turn the mid Attach-A-Matic hitch lever
counterclockwise to lock the snowthrower in place
(Fig. 15).
Important Ensure that the snowthrower frame is
locked in place. You should hear a distinct click if the
snowthrower is correctly mounted.
2
1
Figure 15
Right side of tractor shown
1. Snowthrower frame
9
m–3679
2
2. Notch in snowthrower
frame
m–3707
2. Mid Attach-A-Matic hitch
lever