Table of Contents
Advertisement
Step by Step
Language
Adjusting the angle of the display
By swivelling the display unit, you can adjust it so that
you can read the displays clearly from your normal sit-
ting position.
Selecting the language for user
prompts (displays)
Your HiPath 4000 or Hicom 300 E/H (not used in US)
system can be configured for up to five different lan-
guages. The first language programmed is the default.
If your telephone has a language key, you can program
a different language.
The period of time for which the other language re-
mains active depends on the language option that has
been configured. There are two possibilities:
•
Static language option
The language remains programmed until you
select a different language.
•
Temporary language option
The language remains programmed until the end of
the next call, after which the system reverts to the
default language.
Selecting a language:
Press the key. The language selected appears on the
display for five seconds and is then set. Keep pressing
the key if you wish to select a different language.
This user guide can be ordered in other languages
(not used in US) Æ page 154.
Telephone settings
61 61 61 61
Advertisement
Table of Contents
