Siemens HOPATH 4000 Operating Instructions Manual page 77

Step by Step
FWD-ALL-INT off
Next forwarding type? >
FWD-ALL-EXT off
Next forwarding type? >
FWD-ALL-INT off
Enter destination:
program/service
Destinations?
Destinations?
Call forwarding?
Next forwarding type? >
Next forwarding type? >
Next forwarding type? >
Enter destination:
Save?
Output on first line display.
Output on second line display.
To select the next station variable forwarding type.
Output on first line display.
Output on second line display.
or
To edit the current station variable forwarding type.
Output on first line display.
Output on second line display.
>
Programming/changing the forwarding destination
Press the key. The lamp lights up.
Confirm.
Confirm. Display shows "Station variable forwarding".
Confirm. Display shows "Station fixed forwarding".
Confirm. Display shows "Forwarding for internal".
Open a forwarding type, for example, "Forwarding for in-
ternal".
>
D
Enter the number of the forwarding destination. Any
destination previously saved will be overwritten
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as de-
scribed on Æ page 76.
If station variable forwarding was previously pro-
grammed and activated, it is deactivated and the for-
warding destination is deleted (for exception, see
Æ page 76). Station fixed forwarding is deactivated.
Deleting a forwarding destination
A station variable forwarding destination is automatical-
ly deleted when the forwarding type is switched off.
Forwarding calls
77 77 77 77