Table of Contents
Advertisement
Problem solving guide
Message
F73
or
"Check the brew
unit"
64
Possible cause and remedy
The brew unit cannot be positioned correctly.
^ Switch the machine off with the On/Off - sensor.
^ Remove and clean the brew unit (see "Cleaning and care –
Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see diagram).
^ Do not fit the brew unit. Close the front of the machine and
switch the machine on with the On/Off - sensor.
This will initialise the brew unit motor and put it back into the
start position.
^ When "Insert the brew unit" appears in the display, open
the front of the machine and put the brew unit back in the
machine.
Then close the door.
Advertisement
Table of Contents
