Table of Contents
Advertisement
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Problem solving guide").
After taking the brew unit out of the
machine do not change the position
of the brew unit handle, as this
would cause the brew unit to be out
of alignment and you will not be able
to push it back into the coffee
machine.
^ Clean the brew unit by hand under
hot running water without using
washing-up liquid or any other
cleaning agent.
^ Wipe any remaining coffee off the two
filters (see arrows). One filter is
located in the funnel and the other to
the left of the funnel.
^ Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is prepared.
^ Carefully clean the inside of the
coffee machine.
Cleaning and care
Make sure you regularly remove any
damp ground coffee residues to
prevent the build-up of mould.
Tip: Use your vacuum cleaner to
remove dry coffee grounds.
To replace the brew unit, repeat the
previous steps in the reverse order:
^ Push the brew unit back into the
coffee machine, making sure it goes
in straight.
^ Press the button under the handle of
the brew unit a and, whilst doing so,
turn the handle anti-clockwise b.
^ Close the machine door.
^ Empty the drip tray and the waste
container.
57
Advertisement
Table of Contents
