Cutting Unit Accessories And Kits (See Parts Catalog For Part Numbers) - Toro 03681 Operator's Manual

Cutting Unit Accessories and Kits (see
parts catalog for part numbers)
Note: All accessories and kits are 1 per cutting unit
unless otherwise specified.
Grass Basket Kit: A series of clipping collection
baskets attached to the front of the cutting units to
collect grass clippings.
Rear Lift Cylinder Kit: Collars assembled on rear
cutting unit lift arm cylinders to limit the height of the
cutting units. This increases the area for the rear grass
baskets.
Rear Roller Brush Kit: A high speed, high contact
brush that keeps the rear roller free of grass and debris,
which maintains a consistent height of cut and prevents
clumping. This leads to a better aftercut appearance.
Groomer Kit: Rotating blades assembled behind the
front roller which provide the best method for reducing
grain and spongy turf by standing up the grass before
cutting. The groomer also knocks off dew for decreased
stickiness and clumping, opens up canopy for better
grass clipping integration, and lifts grass for a clean
crisp cut. The overall design improves the quality of cut
for healthier turf grass while improving the after cut
appearance
Broomer Kit: Multiple brush strips woven into the
helical groomer blades improve the effectiveness of the
groomer kit. Performance of the groomer is enhanced
by enabling a full width "Brooming" effect of turf while
opening up canopy for better grass clipping integration.
The combination of groomer and broomer systems
optimize the quality of cut and aftercut appearance for
more consistent playing conditions.
Comb/Scraper Kit: A fixed comb installed behind the
front roller which helps reduce grain and spongy turf by
standing up the grass before cutting. A scraper for the
front Wiehle roller is included in the kit.
High HOC Kit: New front roller brackets and
additional spacers for the rear roller allows the cutting
unit to achieve heights of cut above 1.00 inch (25 mm).
The new front roller brackets also move the front roller
out farther to improve after-cut appearance.
Shoulder Roller: Helps reduce over-lap marks for
warm season grasses (Bermuda, Zoysia, Paspalum).
Collar Kit (6 per needed per roller): Helps reduce over
lap marks for warm season grasses (Bermuda, Zoysia,
Paspalum). This kit is installed on the existing Wiehle
roller, but is not as aggressive as the Shoulder roller.
Short Rear Roller: Helps reduce double roller marks
for cool season grasses (Bent, Blue grass, Rye).
Full Front Roller: Helps produce more pronounced
striping (repeated cutting in the same direction/path),
however, effective height of cut is raised and quality of
cut is reduced.
Scrapers (Wiehle, Shoulder, Rear roller, Full Front
Roller): Fixed scrapers for all optional rollers are
available for reducing grass build up on rollers which
can affect height of cut settings.
Roller Rebuild Kit: Includes all the bearings, bearing
nuts, inner seals and outer seals required to rebuild a
roller.
Roller Rebuild Tool Kit: Includes all the tools and the
installation instructions required to rebuild a roller with
the roller rebuild kit.
8