Product Overview; Specifications; Cutting Unit Accessories And Kits (See Parts Catalog For Part Numbers) - Toro 03180 Operator's Manual

Product Overview

Specifications

Weight
Cutting Unit Accessories and Kits (see
parts catalog for part numbers)
Note: All accessories and kits are 1 per cutting unit
unless otherwise specified.
Grass Basket Kit: A series of clipping collection baskets
attached to the cutting units to collect grass clippings.
Tipper Roller Kit: An adjustable bracket installed on
the traction unit frame, which when the cutting units are
raised, the center cutting unit front roller contacts the
bracket and causes the rear roller to rise for increased
ground clearance. Recommended for higher heights of
cut.
Rear Roller Brush Kit: A high speed, high contact
brush that keeps the rear roller free of grass and debris,
which maintains a consistent height of cut and prevents
clumping. This leads to a better after-cut appearance.
Comb/Scraper Kit: A fixed comb installed behind the
front roller which helps reduce grain and spongy turf by
standing up the grass before cutting. A scraper for the
front Wiehle roller is included in the kit.
Fixed Plate Kit: Bolting on fixed plates over the
suspension mounting links removes the pitch movement
of the cutting unit. Recommended for use on level
surfaces and for higher heights of cut (greater than 1.50
inches [38 mm]). Because the front roller is removed
when using the fixed plates, the quality of cut (efficiency
of cut) is increased.
Shoulder Roller: Helps reduce over-lap marks for
warm season grasses (Bermuda, Zoysia, Paspalum).
Collar Kit (6 needed per roller): Helps reduce over
lap marks for warm season grasses (Bermuda, Zoysia,
Paspalum). This kit is installed on the outer three
grooves of the existing Wiehle roller, but is not as
aggressive as the Shoulder roller.
Short Rear Roller: Helps reduce double roller marks
for cool season grasses (Bent, Blue grass, Rye).
Full Front Roller: Helps produce more pronounced
striping (repeated cutting in the same direction/path),
however, effective height of cut is raised and quality of
cut is reduced.
Scrapers (Wiehle, Shoulder, Rear roller, Full Front
Roller): Fixed scrapers for all optional rollers are
available for reducing grass build up on rollers which
can affect height of cut settings.
27 inch 5 Blade – 148 lb. (67 kg) 27 inch 8 Blade – 153 lb. (69 kg)
27 inch 11 Blade – 158 lb. (72 kg) 32 inch 8 Blade – 167 lb. (76 kg)
8
Roller Rebuild Kit: Includes all the bearings, bearing
nuts, inner seals and outer seals required to rebuild a
roller.
Roller Rebuild Tool Kit: Includes all the tools and the
installation instructions required to rebuild a roller with
the roller rebuild kit.