Refitting the upper door
Place upper door onto middle
hinge pin and guide the upper
opening on the hinge side of the door
onto the door hinge with the bearing
bush.
Use your fingers to insert bolt into
the door bearing bush.
Screw in bolt (by approx. ¼ turn)
until it clicks into position.
Fit safety cover on to the pin.
The appliance door is not secure until
safety cover has been correctly fit-
ted.
Changing the door hinging
Fit holder with the cable connected to
it into the opening: the tab with the
longer opening must face forwards.
Press the holder downwards until the
tab engages.
Connect the cable to the upper
door hinge
Guide cable above the door hinge,
and insert plug .
Lay cable strands into their router.
Carefully lay grey cable into its
router above the hinge.
103