Aligning The Appliance Doors - Miele KFN 29683 D Operating And Installation Instructions

Aligning the appliance doors

The appliance doors can be aligned
with the appliance housing after they
have been fitted.
In the following illustration the door is
not shown in the closed position to
make it easier to see what you have to
do.
To align the lower door use the long
outer slots in the lower hinge plate:
 Remove centre screw  from the
hinge plate.
 Slightly loosen both outer screws .
 Align the door by sliding the hinge
plate to the left or right.
 Then tighten screws  again.
Screw  does not need to be refit-
ted.
106
Align the upper door using the long
outer slots in the middle hinge plate:
 Slightly loosen both screws .
 Align the door by sliding the hinge
plate to the left or right.
 Then tighten screws .