Refit door opening aid on the op-
posite side.
Push door opening slider through
the slots until it clicks into position.
The flush side of the door opening
slider must point towards the door
seal. The plastic lug on the slider must
not abut the door seal but must point
towards the outer edge of the door.
Changing the door hinging
Secure door opening aid with the
screws together with plastic collar .
Do not tighten the screws.
Tip: Check whether the opening aid
moves easily by pressing it. If it does
not, you will need to loosen the screws
slightly.
Fit covers and .
99