Changing the door hinging
Fit the grey cable into the router.
Insert plug .
Tip: If necessary lay any remaining
cable in a loop.
104
Securing the upper soft-close
mechanism
Open the door 90°.
Push on cover until it clicks into
position.
Push hinged arm into the opening
on the door hinge.
Insert pin into the door hinge from
above. Turn this with a screwdriver
(by approx. ¼ turn) until both lugs on
the pin click into position correctly in
the grooves.
Pull out red safety aid .
Tip: Keep the red safety aid in case you
want to change over the door hinging
again at a later date.