Changing The Door Hinging; Fitting Supplied Wall Spacers - Miele FNS 4782 E edt/cs Operating Instructions Manual

Hide thumbs Also See for FNS 4782 E edt/cs:
Table of Contents

Advertisement

Installation

Changing the door hinging

Danger of injury and damage
when changing the door hinging.
There is an increased danger of
injury and damage if the door hinging
is installed by a single person.
Always change the door hinging with
the help of a second person.
The refrigeration appliance is supplied
with left-hand hinging. If right-hand
hinging is required, the hinges must be
changed (see accompanying installation
instructions).
Do not change the hinging if this
refrigeration appliance is going to be
installed side by side with another
refrigeration appliance.
22

Fitting supplied wall spacers

The wall spacers supplied must be
used in order to achieve declared
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures. The
refrigeration appliance depth is
increased by approx. 15 mm for
appliances with wall spacers fitted.
If the wall spacers are not used, the
functionality of the refrigeration
appliance is not affected. Energy
consumption is only slightly increased
with less distance between the
appliance and the wall.
 Fit the wall spacers onto the back of
the refrigeration appliance on the
bottom left and right.

Advertisement

Table of Contents
loading

Table of Contents