Miele KFN 29683 D Operating And Installation Instructions page 74

Problem solving guide
Message
 lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
74
Cause and remedy
There is a fault.
 To switch the alarm off touch  in the display.
 Contact Miele.
To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.
 To do this touch  in the display.
The appliance data required will be shown in the dis-
play.
Confirm with OK
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
 Touch .
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
to exit the information display and