Toshiba MMF-AP0156H-E (TR) Service Manual page 45

4
Push the TIME
SET DATA.
Change the value in SET DATA to that of a new address.
5
SET
Push the button to confirm the new address on SET DATA.
6
UNIT LOUVER
Push the
change.
Each time you push the button, the indoor unit numbers in a refrigerant line are indicated
one after another. Only the fan and louvers of the selected indoor unit are activated.
4 6
Repeat steps to to change the indoor unit addresses so as to make each of them unique.
7
SET
Push the button.
(All the segments on the LCD display light up.)
8
Push the button to finish the procedure.
TEMP.
4
FILTER
RESET TEST
8
Finish
5, 7
/ buttons repeatedly to change the value of the indoor unit address in
button (left side of the button) repeatedly to select another address to
ON / OFF
TIMER SET FAN MODE
TIME SAVE VENT
SET CL SWING/FIX UNIT LOUVER
Press to finish
setting
– 45 –
6