Toshiba MMF-AP0156H-E (TR) Service Manual page 40

Confirming the indoor unit addresses and the position of an indoor unit using the remote
controller
Confirming the numbers and positions of indoor units
To see the indoor unit address of an indoor unit which you know the position of
When the unit is individual (the indoor unit is paired with a wired remote controller one-to-one),
or it is a group-controlled one.
(Execute it while the units are running.)
1
ON / OFF
Push the
2
UNIT LOUVER
Push the
1-1 1-1 1-1
1-1 1-1
A unit numbers
system address and indoor unit address of the unit.
When 2 or more indoor units are connected to the remote controller (group-controlled units), a number of other
connected units appears each time you push the
TEMP.
FILTER
RESET TEST
button if the units stop.
button (left side of the button).
is indicated on the LCD (it will disappear after a few seconds). The indicated number shows the
ON / OFF
Starts
TIMER SET FAN MODE
running
TIME SAVE VENT
SET CL SWING/FIX UNIT LOUVER
button (left side of the button).
UNIT LOUVER
– 40 –
1
2