Software Features; Table 5 4210 Series Software Features - 3Com 4210 Release Notes

Switch 4210 V3.01.09 Release Notes
Item
put voltage
Maximum power
Operating temperature
Operating humidity

Software Features

Table 5 4210 Series software features

Category
Switch mode
VLAN
VLAN interface
Broadcast suppression
multicast
Unknown multicast
drop
STP
Link-aggregation
Port mirroring
Port isolate
February 27, 2009
Switch 4210 PWR 9-
port
Switch 4210 PWR 26-port supports AC and DC(RPS) input, the others
just support AC input.
AC:
Rated Voltage range: 100V~240V AC ;50/60Hz
Max Voltage range:90~264V AC ; 47Hz~63Hz
DC(RPS):
Rated Voltage range: -52V~-56V DC
95W, PoE: 65W
0 0
0 C~45 C
10%~90%
Support Store and Forward
Up to 4K IEEE 802.1Q VLANs(Virtual Local Area Network)
Support one VLAN interface
Support broadcast suppression based on percent of port band
IGMP Snooping(Internet Group Management Protocol Snooping)
256 multicast entries
Support
Support STP/RSTP/MSTP
LACP
Manually aggregation
8 ports in one group
Switch 4210 26-port and Switch 4210 PWR 26-port support 3 groups, the
others support 2 groups.
Switch 4210 52-port supports 6 groups of link-aggregation. Up to 8 ports
in one link-aggregation group
Support one to multiple mirror (one monitor port, no limit of mirrored
ports)
Support
Switch 4210 PWR
18-port
160W, PoE: 125W
Features
Switch 4210 PWR
26-port
AC: 465W, PoE:
370W
DC: 400W, PoE:
370W
Page 9 of 43