Command Line Updates; Table 7 Command Line Updates - 3Com 4210 Release Notes

Switch 4210 V3.01.09 Release Notes

Command Line Updates

Table 7 Command line updates

Version number
V3.01.09
V3.01.08
V3.01.06
February 27, 2009
Item
New commands
Removed commands
Modified commands
New commands
Removed commands
Modified commands
New commands
Description
Command 1
Syntax:
attribute-ignore { standard | vendor vendor-id
} type type-value
undo attribute-ignore { all | standard | vendor
vendor-id }
View : radius scheme view
Parameter:
vendor-id: Specify the vendor ID of radius
attribute that should be ignored. Range from
1~16777215.
Type-value: Specify the type value of radius
attribute that should be ignored. Range from
1~255. The maximum configured counts of this
value are 8.
Description: It is used to configure the radius
attribute ignore.
Example:
# Configure ignore "81" standard attribute of radius
scheme "system".
[4210]radius scheme system
[4210-radius-system]attribute-ignore standard type
81
None
None
Please refer to the manuals.
None
None
Syntax:
[undo]link-delay value
View : interface view
Parameter:
value : Specify the delay time.
Description: It is used to configure the link-down
delay time. Unit: second, Range: 2~10
Example:
# Configure delay time of Ethernet1/0/1 to 5
Page 14 of 43