3Com 4210 Release Notes page 32

Switch 4210 V3.01.09 Release Notes
LSOD05807
First found-in version: V3.01.03
Condition:
Build cluster on switch, reboot the cluster member switch by "reboot member mac-address H-H-H"
command in cluster view.
Description:
The cluster member switch can not be restarted successfully.
LSOD06155
First found-in version: V3.01.03
Condition:
More than two devices have been in cluster. View the cluster information on the device.
Description:
There are some English syntax mistakes in the information.
LSOD06148
First found-in version: V3.01.03
Condition:
Enable port-security port-mode mac-authentication on the device. Configure vendor-specific of
authentication policy on Windows 2000 Server with 010300000003 which is neither RFC standard nor
correct code.
Description:
The device will reboot repeatedly when the user starts MAC authentication.
LSOD05267
First found-in version: V3.01.03
Condition:
Enable Port Security ELSE mode on the device. Configure legal user of Dot1x and MAC
authentication. The user starts Dot1x authentication.
Description:
The user passed Dot1x authentication, and did not go through MAC authentication. The correct
process is the user goes through MAC authentication firstly.
LSOD06181
First found-in version: V3.01.03
Condition:
Enable port security userlogin-withoui mode and configure the port security OUI MAC address. The
user's PC MAC address is not equal to the OUI MAC address.
Description:
Although the user passed the Dot1x authentication, the device still sends the intrusion trap message.
February 27, 2009 Page 32 of 43