Alarm Activation; Snooze; Temperature Trend Icons; Low Battery Indicatior - La Crosse Technology K86302 Instruction Manual

ALARM ACTIVATION ICON:
Press and release the ALARM button once to show Alarm Time.
With the Alarm time showing, press and release the ALARM button to activate the alarm. The alarm icon
when alarm is activated.
With the Alarm time showing, press and release the ALARM button to deactivate the alarm. The alarm icon will
disappear when alarm is activated.

SNOOZE:

When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 10 minutes. The snooze icon Zz and the
alarm icon will flash when the snooze feature is active.
To stop alarm for one day, press AL button, while in snooze mode. The alarm icon

TEMPERATURE TREND ICONS:

The temperature trend indicators are shown behind the indoor temperature and outdoor temperature readings.
The indoor and outdoor temperature trend indicators are updated every 30 minutes. Trends arrows represent temperature
changes over the past three hours. Example: At 3:00pm compare temperature readings to 12:00pm. At 3:30pm compare
to 12:30pm readings.
Temperature rose more than 2°F (1°C) in the past three hours
Temperature did not change more than 2°F (1°C) in the past three hours
Temperature fell more than 2°F (1°C) in the past three hours
LOW BATTERY:
When this icon
When this icon

OUTDOOR TRANSMITTER RECEPTION ICON:

When the signal is successfully received from the outdoor transmitter, the reception icon will be solid.
The reception icon will flash when searching for the outdoor transmitter signal.
If reception is not successful, the icon will not be shown in LCD.
Hold the +/TEMP button to search for the outdoor transmitter.
appears in the indoor (IN) reading section, replace the batteries in the Digital Atomic Clock.
appears in the outdoor (OUT) readings section, replace the batteries in the outdoor transmitter.
appears
will remain solid.
6