La Crosse Technology WT-8005U Manual

La Crosse Technology WT-8005U Manual

Atomic digital wall clock
Hide thumbs Also See for WT-8005U:

Advertisement

WT-8005U
Atomic Digital Wall Clock
by La Crosse Technology
®
La Crosse Technology, Ltd.
www.lacrossetechnology.com
2809 Losey Blvd. S.
La Crosse, WI 54601
Phone 608-782-1610
Page 1 of 12

Advertisement

Table of Contents
loading

Summary of Contents for La Crosse Technology WT-8005U

  • Page 1 WT-8005U Atomic Digital Wall Clock by La Crosse Technology ® La Crosse Technology, Ltd. www.lacrossetechnology.com 2809 Losey Blvd. S. La Crosse, WI 54601 Phone 608-782-1610 Page 1 of 12...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents ..........2   Congratulations ........... 3   Features: ............. 3   Important Information: ......... 3   Manual time setting and other settings: ....4   Daylight Saving Time .......... 5   Setting the Time Zone: ........5  ...
  • Page 3: Congratulations

    Congratulations You have purchased an atomic digital wall clock from La Crosse Technology , providing the ® world's most accurate time at a glance. Now you'll never need to worry about setting your clock again. Features: • WWVB Radio controlled Clock (Atomic Clock) •...
  • Page 4: Manual Time Setting And Other Settings

    You may need to move the clock away from sources of interference such as TV monitors or concrete walls. • If the automatic setting process is unsuccessful, use a sharply pointed instrument to press the "Reset" button on the back of the clock.
  • Page 5: Daylight Saving Time

    Technology and WWVB encode a special DST “bit” in the WWVB transmission for DST. • Your La Crosse Technology® clock will read this information (only if "DST" is set to "on" -) and automatically advance the time one hour in the spring and back an hour in the fall.
  • Page 6: About The Daily Alarms

    • To set the Alarm Time, press and hold down the ALARM button for 2 seconds until the hours digits flash. Use the “▲” and “▼“buttons to set the required hour. Press ALARM button to confirm your setting • The Minute display of the Alarm time starts to flash.
  • Page 7: F/°C Temperature Display

    °F/°C Temperature Display: • The temperature is displayed either in °F or °C. Briefly pressing the “▼ “button allows you to switch between the temperature modes. Reception of the WWVB Radio signal: • The clock must receive the WWVB Radio Signal to automatically set the time, date and weekday.
  • Page 8: Online Resources

    Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such environments, place the system close to the window. Online Resources • Visit the WT-8005U page online at: http://www.lacrossetechnology.com/8005 Care and Maintenance • Extreme temperatures, vibration and shock...
  • Page 9: Battery Replacement

    If the clock receives a clear signal it will set itself perfectly. If it does not receive a signal consider the following: • Battery - The La Crosse Technology® clock must have a fresh battery to receive and process the time signal. Page 9 of 12...
  • Page 10: Specifications

    Please use only fresh Alkaline batteries. • 2 “AA” Alkaline Batteries (not included) Warranty Information La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date...
  • Page 11 La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All...
  • Page 12 La Crosse Technology, Ltd 2817 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 For information on other La Crosse Technology® products, e-mail: sales@lacrossetechnology.com All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or...

Table of Contents