Specifications - Makita PC5000C Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Wheel diameter
Rated speed (n)/No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for planing concrete surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model
Hole diameter
Spindle thread
)
0
Overall length
Net weight
Safety class
equipment
environmentally compatible
noise level determined
END202-6
Model PC5000C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model PC5001C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
and its
determined according to EN60745:
Model PC5000C
Work mode : planing concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENE002-1
Model PC5001C
Work mode : planing concrete
ENF002-2
Vibration emission (a
Uncertainty (K) : 2.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
ENG905-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
The declared vibration emission value is used for
•
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
2
PC5000C
125 mm
22.23 mm
M14
10,000 min
437 mm
4.0 kg
/II
pA
) : 102 dB(A)
WA
pA
) : 100 dB(A)
WA
Wear ear protection
total value
) : 12.0 m/s
h
2
) : 12.5 m/s
h
2
PC5001C
-1
479 mm
5.1 kg
) : 91 dB(A)
) : 89 dB(A)
ENG900-1
(tri-axial vector sum)
2
2
ENG902-1