Disabling Automatic Channel Switching - Uniden UM455 Owner's Manual

Using Digital Selective Calling (DSC) Features

Disabling automatic channel switching

If you are involved in a bridge-to-bridge call, you may not want the radio to
automatically switch channels when it receives a DSC call. In cases like this, you can
disable automatic channel switching. If you receive an individual call, the radio will
respond with an unattended code, just as if the radio were in Standby.
1. Press and hold
2. Select Setup and then Auto CH SW.
3. Choose Off and press
until you reactivate this feature.
NOTE: Use this feature with caution. Deactivating automatic switching and then
forgetting it can make it hard for you to receive DSC calls.
If you have unread incoming DSC calls, the radio displays a message icon. You will
be able to review who has called. The radio displays the last 10 distress calls and the
last 20 non-distress calls it received (see the receive log on page 27).
to display the normal menu.
CALL-MENU
. The radio will not automatically switch channels
ENT-1W/25W
39