Uniden UM455 Owner's Manual page 42

Installing the Hardware
2. Position the radio into the desired location. Mark the edges of the bracket on the
mounting surface.
3. Remove the mounting bracket drill template from the back of the manual, and use
the template to mark the drill holes on the mounting surface.
4. Drill the holes for the mounting bracket; be sure to follow any special
requirements of the mounting surface.
5. Remove the bracket from the radio, and use the mounting hardware to secure the
bracket to the mounting surface.
Hex nut
Spring washer
Washer
Hex bolt
6. Install the radio back into the mounting bracket.
42
Mounting
surface
Mounting
bracket