●
Specifying the File Server on the Touch Panel Display:
•
Specifying the File Server by Host Search:
Press [Scan and Send] → [New Destination] → [File] → from the protocol drop-down list, press
[Windows (SMB)] → press [Search Host] → on the search criteria screen, enter the IP address for the
computer you are using → press [Start Searching] → specify the file server → confirm the settings →
press [OK].
•
Specifying the File Server by Browsing:
Press [Scan and Send] → [New Destination] → [File] → from the protocol drop-down list, press
[Windows (SMB)] → press [Browse] → select the work group name and file server → specify each
settings → [OK].
•
If you want to confirm the IP address for the computer you are using, on the [Start] menu → click [Run] → enter 'cmd'
→ click [OK] → enter 'ipconfig' → press [Enter] on the keyboard. (The procedures may differ, depending on the type of
operating system you are using.)
0