Microlife Watch BP 03 Instruction Manual page 26

3) Start the measurement – Press the ON/OFF
Button to start measurement.
4) During the measurement –The cuff will inflate
automatically. One measurement cycle includes
two measurements. Once the first measurement
is complete, the second measurement will begin
after 60-seconds.
1
60 sec.
26
SYS
mmHg
D I A
mmHg
PUL
/min
2
5) Finishing the measurement – Once the two
measurements are complete, measurement
data is automatically stored for later reference
by the physician. If an error displays after the
measurements, the process should be repeated
once again.