Adjusting The Volume Of The Pads Or Drum Kit (Mixer) - Roland TD-4KP Owner's Manual

Creating a Drum Kit

Adjusting the volume of the pads or drum kit (MIXER)

Adjusting the volume and pan (stereo position) of individual pads/pedals.
1. In the menu screen, choose "2 MIXER" and press
the [OK] button.
The "Mixer" screen will appear.
fig.
Screen
• If Head/Rim Link (p. 36) is ON, the Pad Volume and Pan settings of the Head and Rim (or for a cymbal, the bow and edge) will be
edited simultaneously for SNARE, HH, CRASH, and RIDE. The screen will indicate the value of the setting for the head (or for a cymbal,
the bow). If Head/Rim Link is OFF, strike the pad's head or rim (or for a cymbal, the bow or edge) to select the setting you want to edit.
• If Head/Rim Link (p. 36) is ON, and the Pad Volume and Pan of the head and rim (or for a cymbal, the bow and edge) have different
values, an "*" will appear at the right side of the screen.
28
Parameter Value
Pad Volume 0–100
Pan L10–CENTER–10R
Kit Volume 0–10
Xstick Volume OFF, 1–3
2. Use the SEL[ ] [
parameter.
3. If the parameter is "Pad Volume" or "Pan," strike a
pad to select the pad whose setting you want to
edit.
The pad you struck will blink in the screen.
4. Use the [-/+] dial to edit the setting.
5. Press the [OK] button to return to the "MENU"
screen.
Explanation
Volume of each pad
* Use the HH Pedal Sens setting (p. 35) to
adjust the sensitivity of the hi-hat pedal.
Pan position of each pad
Volume of the entire drum kit
Cross stick volume
Raising this value will increase the volume of the
cross stick.
For a value of 1–3, the Drum Kit screen will indi-
cate "Xstick."
When set to "OFF," playing cross stick will pro-
duce the open rim shot sound.
* Use the Xstick Adjust setting (p. 35) to adjust
the level of the striking force at which the
switch between the cross stick sound and the
open rim shot sound will be made.
]buttons to select a