Page 2
(except when this manual provides specific instructions directing you to do so). Refer all servicing to your retailer, CAUTION the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. • Try to prevent cords and cables from becoming entangled.
Anchor bolts Slip-prevention tape Mounting plate for the kick pedal Base Specifications KD-9: Kick Pad 219 (W) x 203 (D) x 438 (H) mm Dimensions 8-5/8 (W) x 8 (D) x 17-1/4 (H) inches Weight 2.8 kg / 6 lbs 3 oz Accessories Owner’s Manual, Connection Cable...
(TDM series), the slip-prevention tape that’s on the base Check to make sure that the base of the KD-9 and the kick should prevent the KD-9 from moving around. pedal both make contact with the floor.
* For details, refer to the owner’s manual for your percus- Connect the L-shaped plug of the cable to the KD-9’s sion sound module. output jack. * Make sure KD-9 does not touch the drum stand or other TD-20X, TD-20, TDW-20, TD-12 pads. Trig Type...
Page 7
For EU Countries For China For C.A. US ( Proposition 65 ) WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.
Page 8
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. PHILIPPINES CURACAO URUGUAY POLAND JORDAN AFRICA G.A. Yupangco & Co. Inc. Zeelandia Music Center Inc. Todo Musica S.A.
Need help?
Do you have a question about the V-Drums KD-9 and is the answer not in the manual?
Questions and answers