Adjusting The Display Contrast (Lcd Contrast); Adjusting The Brightness Of The Backlight (Lcd Bright); Adjusting The Button Operating Sound (Keypad Sound); Allowing The Head And Rim Settings To Be Edited Separately (Head/Rim Link) - Roland TD-4KP Owner's Manual

System Settings

Adjusting the Display Contrast (LCD Contrast)

fig.d-Sys-Option-1.eps
Value
1–10
Adjusting the Brightness of the Backlight
(LCD Bright)
fig.d-Sys-Option-2.eps
Value
1–10
Adjusting the Button Operating Sound
(Keypad Sound)
fig.d-Sys-Option-3.eps
Value Explanation
OFF The buttons will not produce an operating sound.
1–3 Specifies the volume of the operating sound.
Allowing the Head and Rim Settings to be
Edited Separately (Head/Rim Link)
fig.d-Sys-Option-4.epsm
Value Explanation
Head and rim (or for a cymbal, the bow and
edge) settings (Instrument/Tuning/Muffling/
Pad Volume/Pan) will be edited simultaneously
for SNARE, HH, CRASH, and RIDE.
ON
* If Crash 2 Usage is set to RIDE BELL, the
RIDE's BELL will also be edited
simultaneously.
Head and rim settings will be edited separately
OFF
for SNARE, HH, CRASH, and RIDE.
36
Having the Power Turn Off Automatically
(Auto Off)
When shipped from the factory, the TD-4 is set to
automatically power-off when 30 minutes have elapsed since
it was last played or operated. Approximately five minutes
before the power turns off, a message will appear in the
display.
Value Explanation
OFF The power will not turn off automatically.
The power will turn off automatically when
10 MINS
10 minutes have elapsed.
The power will turn off automatically when
30 MINS
30 minutes have elapsed.
The power will turn off automatically when
4 HOURS
four hours have elapsed.
Restoring the Factory Settings
(Factory Reset)
The "Factory Reset" operation returns all settings of all pads and
drum kits stored in the TD-4 to their factory-set condition.
* If you want to return an individual kit to its factory settings,
execute the drum kit "Restore" operation (p. 32).
The settings stored in the TD-4 will be lost when you execute
a factory reset.
1. In the "Options" screen, press the SEL [
a number of times to choose "Factory Reset," and
press the [OK] button.
fig.d-Sys-FRst-1.eps
2. Use the [-/+] dial to select the settings for which
you want to execute a factory reset.
Value Explanation
PADS PAD SETTINGS parameter
System Parameter
SYSTEM
(OPTIONS and PAD SETTINGS parameter)
ALL KITS All Drum kit
ALL All of the TD-4's data
] button