Specifying How The Cr2 Trigger Cable Will Be Used; Other Settings (Options) - Roland TD-4KP Owner's Manual

Screen

Specifying How the CR2 Trigger Cable will be Used

* This parameter is inactive on the TD-4KP.
Screen

Other Settings (OPTIONS)

1. Press the [MENU] button so it's lit.
The MENU screen appears.
fig.d-KitMenu-1.eps
2. Use the SEL [ ] [
"9 OPTIONS," and press the [OK] button.
The Options screen appears.
fig.d-Sys-Option-1.eps
Parameter/Value
HH Pedal Sens
-5–+5
Xstick Adjust
-9–+9
Advanced Edit
Parameter/value
Crash 2 Usage
RIDE BELL:
The CR2 trigger cable will be used for RIDE BELL.
CRASH 2:
The CR2 trigger cable will be used for CRASH2.
] buttons to choose
Explanation
Adjusts the sensitivity of the "foot close" or "foot splash" sound.
Positive (+) values will produce a louder sound even when you press
the pedal lightly.
Specifies the striking force at which the cross stick and open rim shot
sounds are switched.
Positive (+) values will play the cross stick sound even for stronger
strikes.
Here you can adjust the pad parameters in greater detail.
Refer to p. 40.
Explanation
3. Use the SEL [
parameter that you want to edit.
4. Use the [-/+] dial to edit the value.
5. Press the [OK] button to return to the "MENU"
screen.
System Settings
] [ ] buttons to select the
35