Honeywell Excel 50 User Manual page 62

Hide thumbs Also See for Excel 50:

Table of Contents

Fig. 75. Manually setting the state/value of digital output data-points

Confirm the displayed value with ENTER, or change the state/value using the

PLUS or MINUS keys and confirm.

If "Alarm History" has been selected, a listbox similar to the one shown in Fig. 76

will be displayed showing all points in alarm as well as any system alarms (max.

100 entries):

NOTE: Alarms are generated for changes of state/value on inputs, which allows

shorting and opening the inputs at the switches and/or sensors and then

checking the alarm buffer to verify the wiring.

To display an alarm, use the ARROW keys to move the cursor to the default data-

point's name from the list box and confirm. A screen similar to Fig. 77 will appear.

EN2B-0222GE51 R0216

Fig. 76. Alarm history

Fig. 77. Displaying an alarm

EXCEL 50 MMI - USER GUIDE

Table of Contents

Show Quick Links

Table of Contents