Honeywell Excel 50 User Manual page 53

EXCEL 50 MMI - USER GUIDE
You can proceed to the second screen of the ALARMS procedure using the
RIGHT and LEFT ARROW keys.
Move the cursor to the desired item, e.g. "Point in alarm", and confirm. A screen
resembling the left one shown in Fig. 64 will then appear.
Fig. 64. Screen displaying all points in alarm
This screen displays all the points currently in alarm in the list box. To access
more information about a specific alarm, use the ARROW keys to move the cursor
to the appropriate alarm name and confirm. The resultant screen will have the
appearance of the one shown to the right in Fig. 64.
Alarm information (comprising the date, time, alarm name, value/state and alarm
reason) is displayed. Press CANCEL to return to the previous screen.
NOTE: The same operating method as described for "Point in Alarm" applies to
the "All Alarms", "Critical Alarms" and "Non-Crit. Alarms".
If the item "Bus-wide alarms" has been chosen from the alarm menu, a screen
resembling Fig. 65 will appear ("#" represents a number from 1 through 30).
Fig. 65. Buswide alarms
This screen shows a list of all controllers connected to the bus. Move the cursor to
the appropriate controller and confirm. A list box with all alarms in the alarm buffer
of the specified controller will be displayed in a screen resembling the left screen
shown in Fig. 64. Move to the appropriate alarm and confirm.
45 EN2B-0222GE51 R0216