Creating A Switch-Point; The 'Weekly' Time Schedule - Honeywell Excel 50 User Manual

Hide thumbs Also See for Excel 50:

Table of Contents

EXCEL 50 MMI - USER GUIDE

Fig. 23. Deleting a switch-point

Creating a Switch-Point

Switch-points are defined by selecting desired data-points from a list of all

possible data-points valid for the given daycycle and then editing the

corresponding value/state and clock-times (i.e. switch-points).

To do this, move to the listbox displayed in Fig. 18 and press the PLUS key. In the

resultant screen (see Fig. 24), you will be presented with a list of all possible data-

points valid for this daycycle.

Fig. 24. Creating a switch-point

Move the cursor to the data-point for which switch-points are to be defined and

confirm.

A screen resembling Fig. 19 or Fig. 20 (as the case may be) will then appear. Edit

the value/state and switch-point(s) as desired and confirm.

Selecting the "Weekly" time schedule will cause a listbox with a corresponding

heading (containing the given time program and, next to it, the word "Weekly") to

appear (see Fig. 25).

EN2B-0222GE51 R0216

Table of Contents

Show Quick Links

Table of Contents