Access Levels; Password Procedure - Honeywell Excel 50 User Manual

NOTE: The two-digit CPU field (in the upper right-hand corner), the date, and
the time will be editable only if you are already in access level 3 (see
section "Access Levels" on page 6).
NOTE: The "Logout" edit field will appear only if you are already in access level
2 or 3 (see section "Access Levels" on page 6).
Selecting the "Password" field will take you to the password procedure (see
section "Password Procedure" on page 6).

Access Levels

The use of three access levels ensures that only authorized personnel can
read/edit sensitive system data. In order to enter access level 1, no password is
necessary, and only those screens accessible at that level will be displayed (see
also Table 2). In order to enter access levels 2 and 3, a corresponding password
must be entered.
Table 2. Access Levels and Corresponding Authorizations
access PLANTS key
level
( )
1 read only
2 read only
3 unlimited editing possible
NOTE: In the following sections, the password procedure will not be repeated.
Refer back to this section for guidance on entering the password.
IMPORTANT
If you have forgotten the level-3 password, please contact your local
Honeywell branch.

Password Procedure

Upon selecting the "Password" field, the following screen will appear (see Fig. 5
on page 7).
EN2B-0222GE51 R0216
TIME PROGRAMS
key ( )
read only
time schedules
6
EXCEL 50 MMI - USER GUIDE
SYSTEM TOPICS
key ( )
no effect
no effect
ALARMS key
( )
read only
read only
read only